It’s a known fact that motorcycle enthusiasts sometimes don’t take their motorcycles out in certain weather conditions or even on certain terrains because of the amount of dirt and dust their pride and joy could be exposed to.

The biggest issue for motorcycles is the constant requirement to clean and maintain all surfaces very regularly. This becomes a nuisance for those that live or ride in difficult weather conditions as they are constantly exposed to the elements that damage not only their bikes but the visors also. As it gets constantly attacked by dirt and dust, it makes it difficult to see and in certain weather conditions visibility can be deteriorated by this.

Take your motorcycle out with CrystalXtreme®

With CrystalXtreme®, pretty much every part of the bike can be coated and protected including the spokes, the body, the fuel tank and the engine. You won’t need to even worry about the helmet or the visor, as they can be coated as well.

The great benefit of the coating is that even the rider is protected while they are on their bike as the super phobic coating repels any form of dirt, dust and rainwater. They will just bounce off like ping-pong balls of the bike and the helmet.

Cleaning and maintaining your bike will no longer be a nightmare! You will have no more needs for harsh products that could damage the bike. Your worry will be something of the past.

The benefits of using CrystalXtreme® to protect your bike:

  • Creates an abrasion resistant invisible layer of protection
  • Protects motorcycle body from dirt and brake dust
  • Repels dirt and grease
  • Make your alloys easy to clean
  • Enhances visibility when riding in adverse weather conditions

And the process of application is simple:

Step 1 – Clean: Prepare the surface of your bike by cleaning it thoroughly ensuring it is free from dust, oil, grease and other soiling or surfactants. Only use cleaners without any drying agents. After this wipe the ca surface down with alcohol, we recommend organic isopropanol. Once completed buff the surface dry with a microfibre cloth.

Step 2 – Apply: Prior to applying CrystalXtreme® on your bike ensure the surface is completely dry. Shake the bottle well and spray the CrystalXtreme® product onto a lint-free or microfibre cloth. If you are using the windscreen & visor pack, tear the sachet and remove the pre-treated lint-free cloth. Distribute evenly across the entire surface until the cloth is dry.

Step 3 – Dry: The CrystalXtreme® layer will take a few hours to form itself and therefore it is essential to allow the surface to dry. You may find streak marks appear on your bike. Allow the bike to dry overnight if possible and then remove the streaks by buff drying the bike with the microfibre cloth provided with your CrystalXtreme® order.

For information about product specific application please refer to the “Application Instructions” tab on each product in the CrystalXtreme® Shop, and please ensure to read the instruction booklet provided with all orders prior to applying CrystalXtreme® on your motorcycle.